IoT Products by espressif
ESP-BAT32
During the production testing, the signal board can be used as a standard device for communication with the DUT (Provided by Espressif).
ESP-BAT8
During the production testing, the signal board can be used as a standard device for communication with the DUT (Provided by Espressif).
ESP-FactoryTB1
Designed for R&D and certification test, this stable production testing board works as a serial port board that provides two high-speed serial ports.
ESP-FactoryTB2
Designed for mass production and testing, this stable and compact production testing board works as a serial port board that provides two high-speed serial ports and a USB port that allows external power supply.
ESP-Module-Prog-1(R)
ESP-Module-Prog-1(R) is an Espressif flashing mainboard designed specifically for Espressif modules. It can be used to flash modules without soldering the module to the power supply and signal lines.
ESP-Module-Prog-SUB-01&04
ESP-Module-Prog-SUB-01&04 is an Espressif flashing subboard designed specifically for modules. It can be used to flash modules without soldering the module to the power supply and signal lines.
ESP-Module-Prog-SUB-02
ESP-Module-Prog-SUB-02 is an Espressif flashing subboard designed specifically for modules. It can be used to flash modules without soldering the module to the power supply and signal lines.
ESP-Prog
ESP-Prog is one of Espressif’s development and debugging tools, with functions including automatic firmware downloading, serial communication, and JTAG online debugging. ESP-Prog's automatic firmware downloading and serial communication functions are supported on both the ESP8266 and ESP32 platforms, while the JTAG online debugging is supported only on the ESP32 platform. ESP-Prog uses FT2232HL as its USB Bridge Controller chip.
ESP Thread Border Router/Zigbee Gateway
ESP Thread Border Router/Zigbee Gateway board integrates the ESP32-S3 SoC and the ESP32-H2 RCP, enabling the development of Thread Border Router and Zigbee Gateway products. Espressif's Thread Border Router solution complies with Thread 1.3 and supports the Matter application. It offers various features including Bi-directional IPv6 connectivity, Service Discovery Delegate, Service Registration Server, Multicast Forwarding, NAT64, and a user-friendly Web GUI for easy configuration. Additionally, the board supports the addition of daughter boards to expand its functionality such as: Ethernet interface (available for separate purchase), HMI and Voice Control.
ESP-WROOM-V1
For flashing / testing ESP-WROOM-02D / ESP-WROOM-02DC / ESP-WROOM-02 modules (must be used with ESP-BAT8 for testing)
ESP-WROOM-V3
For flashing / testing ESP-WROOM-02U / ESP-WROOM-02UC modules (must be used with ESP-BAT8 for testing)
ESP32-C3-AWS-ExpressLink-DevKit
ESP32-C3-AWS-ExpressLink-DevKit is a development board based on the ESP32-C3-MINI-1-N4-A module. Its pin layout is compatible with that of the Arduino Zero development board.
ESP32-C3-DevKit-RUST-1
ESP32-C3-DevKit-RUST-1 is based on the ESP32-C3, a single-core Wi-Fi and Bluetooth 5 (LE) microcontroller SoC. This special board includes the ESP32-C3-MINI-1 module, a 6DoF IMU, a temperature and humidity sensor, a Li-Ion battery charger, and a Type-C USB.
ESP32-C3-DevKitC-02
ESP32-C3-DevKitC-02 is an entry-level development board equipped with ESP32-C3-WROOM-02 or ESP32-C3-WROOM-02U. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
ESP32-C3-DevKitM-1
ESP32-C3-DevKitM-1 is an entry-level development board equipped with ESP32-C3-MINI-1 or ESP32-C3-MINI-1U. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
ESP32-C3-LCDKit
ESP32-C3-LCDKit is a development board used for evaluating rotary knob applications. The board consists of a mainboard and a subboard.
ESP32-C3-Lyra
ESP32-C3-Lyra is an ESP32-C3-based audio development board produced by Espressif for controlling light with audio.
